Productivity and Cost-Effectiveness is today more important than ever in the industrial world. Developed in response to this need, the fully next-gen SES bearings enable Schaeffler set itself apart from the competition. With its innovative design and superior features, SES bearings allow you to get maximum productivity from your equipment and production facilities, while significantly reducing your costs.
Switch to standardized SES plummer block housings and gain the following benefits:
- Simplified housing selection it is now easier for you to switch to our innovative SES plummer block housings due to a new system of housing designations based on the standard. The housing and component dimensions correspond to the standard and the market is familiar with them.
- Extended range of designs compared to the competition.
- Optimum lubricant supply through lubrication holes in the upper housing section.
- Robust housing for aggressive environmental conditions. Strengthening around the fixing holes and high rupture loads provide improved strength and greater rigidity.
- Longer bearing operating life due to innovative housing design. This is achieved through optimized load distribution in the bearing.
- Markings in the upper housing section show the condition monitoring and lubricant supply connection points. The housings are therefore Industry 4.0 compliant.
- Controlled egress of used lubricant due to standardized outlet hole. This is closed off with a screw plug in the delivered condition.
- Quick and easy to align the housing due to indentations that indicate the shaft and bearing center.
- Quick bearing replacement when combined with split spherical roller bearings from the standard Schaeffler range. This avoids long downtimes.
Taconite seal – ETC
These seals are suitable for extreme operating conditions with respect to contamination and dust.
Schaeffler also offers a standard range of split spherical roller bearings for use with the split SES housing series. This provides a complete split solution for quick replacement of both bearings and housings. This is particularly beneficial in hard-to-reach applications or installations on a continuous shaft as it is no longer necessary to split units mounted on the shaft such as gearboxes or motors. This saves time and money which leads to a significant reduction in the Total Cost of Ownership (TCO).
SES plummer block housings are available in shaft diameters from 20 mm to 160 mm and 3⁄4 inch to 5 1⁄2 inch.
SES plummer block housing with split spherical roller bearing
25% Up to 25 % higher housing rupture loads due to optimized design. And without any increase in weight.
BİREBİR 1-to-1 … replacement of standard market solutions.
50% Up to 50 % longer bearing operating life due to innovative housing design.
- A wide range of seal options is available for flexible and economical solutions in many different applications.
- Optimum sealing solutions from a standard range for every application
- Longer run times for installed rolling bearings
- Easy replacement due to standard market dimensions
- Lower maintenance outlay and shorter downtimes
- Lower mounting costs
- Reduced material usage
Reduced disposal costs Optimized load distribution: Protects the bearing and helps reduce Total Cost of Ownership (TCO) and increase the operating life.
